Menzerna Super Heavy Cut Compound 300 -250ml
Menzerna Super Heavy Cut Compound is the all new heaviest cutting and correction compound from Menzerna, packed with 25% more correctional ability than FG400! Because it’s contains even more extremely refined aluminium oxide Menzerna Super Heavy Cut is able to remove scuffs, scratches and swirl marks from even the toughest paints. As with all Menzerna polish it is manufactured using the most
- Description
- Size Guide
- Reviews (0)
Description
Menzerna Super Heavy Cut Compound 300 -250ml
Menzerna Super Heavy Cut Compound is the all new heaviest cutting and correction compound from Menzerna, packed with 25% more correctional ability than FG400!
Because it contains even more extremely refined aluminium oxide Menzerna Super Heavy Cut is able to remove scuffs, scratches and swirl marks from even the toughest paints. As with all Menzerna polish it is manufactured using the most uniform shaped abrasive particles, which not only results in a high level of cut, but also a level of shine that shouldn’t be achievable from a product with this level of cut. It is so effective at not inducing hazing that it possible on harder paints to go directly from compounding to a finishing product.
Menzerna Super Heavy Cut also produces very little in the way of dust and offers longer working times making this polish pleasant to work with.
We therefore highly recommend this polish on all harder paints and where there are heavier scuff, scratches or swirl marks.
- Maximum in abrasion
- Fast Cutting Action
- Low Dusting
- Removes 1500 grit sanding marks
- Silicone & Filler Free
Cut: 10 (Max: 10)
Gloss: 5 (Max:10)
Recommended Usage by Menzerna:
1. Clean surface thoroughly prior to polishing.
2. Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).
3. Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambs wool in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine by 10%.
5. If working on very dry coatings, spray a little water onto the surface to prevent dust formation.
6. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
7. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure.
8. Any signs of sanding and use have now been removed. For an exceptionally glossy finish, now apply a Menzerna Finish Polish.
250ml
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Reviews
There are no reviews yet.