Adam’s Graphene Ceramic Coating™ Advanced – 60 ML

Description

Adam’s Graphene Ceramic Coating™ Advanced – 60 ML

Adam’s Graphene Ceramic Coating™ Advanced is an easy-to-use Ceramic Coating that can be seen where applied using the Adam’s UV Flashlight and our patent-pending UV Tracer Technology™. With improved characteristics, this coating is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.

• >10H Hardness, 9+ Years of Protection
• 50% Increased Coating Resin Over Graphene Ceramic Coating™
• Inclusion of Additional Silicate Resin for Added Durability and Longevity
• Less prone to water spotting
• Higher stain resistance against bugs, saps, droppings, etc.
• Higher scratch resistance during the washing process
• Increased depth and clarity to all surfaces
• Lower sliding angle with water evacuating at angles less than 10-15°
• Higher contact angles averaging more than 110-118°
• Patent Pending, UV Tracing Technology™
• Free to apply to all Painted Surfaces, Glass, Headlights, Chrome, Trim, Wheels, and even Bed Liners!

Description:

in the kit you’ll find:

1- 60ml Graphene Ceramic Coating Advanced

1- 4oz Ceramic Boost

1- 4oz Surface Prep

2- Single Soft Towels

2- Suede Removal Towels

2- Suede Applicators

1- Pair of Gloves

Optional 1- UV Flashlight

Instructions for Paint & Glass:

Prepare your painted surface or glass by using the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. For optimal results, users must Wash, Clay/Decontaminate, and Polish their paint prior to application.
Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam’s UV Flashlight for inspections. Take note of between the body lines, bumper areas, mirror caps, and commonly missed areas on your vehicle. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.
Instructions for Plastic Trim & Headlights:

Prepare your plastic trim or headlights by using the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated plastic trim or headlights, we recommend a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel.
Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. Since the product is being applied to a porous surface, you will not see a rainbow/ flashing effect – the immediate color change of the plastic or trim will reveal where the product has been applied. However, you are also able to utilize the Adam’s UV Flashlight for inspections where desired.
Once the recently applied product has penetrated, begin leveling the coating, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.
Instructions for Wheels:

Prepare your wheels by using the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated wheels, we recommend a thorough cleaning with Adam’s Wheel Cleaner, or Eco Wheel Cleaner, in addition claying with a Fine Grade Clay Bar and Detail Spray may also be necessary to initially remove stubborn contaminations from the barrels and/or wheel faces.
Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize Adam’s UV Flashlight for inspections. Take note of behind the spokes, in between the crevices of the wheel design, around the valve stem and center cap areas. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.
Once the recently applied product begins to characteristically flash and sweat into beads, begin wiping the coating off, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating.
Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.